Home > Apparel > Gloves & Mittens > Heated Gloves > TourMaster Synergy 2.0 Electrically Heated Leather Gloves
TourMaster Synergy 2.0 Electrically Heated Leather Gloves
Item Qualifies for Free Shipping
Tour Master Synergy 2.0 apparel is designed to operate from a vehicle\xCDs standard 12-volt
electrical system to provide unmatched levels of warmth and comfort. With Synergy 2.0 apparel,
wearers can be warm without the bulk and discomfort typically caused by excessive layers of
clothing. By providing increased warmth and mobility in cold temperatures, Synergy 2.0 apparel
helps reduce fatigue while increasing safety and enjoyment.
Includes: Gloves, Power Lead Battery Harness, and Singe Rheostat Unit (Temperature Controller)
Each Synergy 2.0 garment is heated by a series of durable steel fiber heating elements, which generate safe, electronically controlled infrared heat. In addition to safe and even heating, the steel fiber elements are lightweight, flexible and safe to operate in wet conditions. It is flexibility that allows Synergy 2.0 garments to fit comfortably under protective riding apparel.
IMPORTANT: Before using this guide, please make sure that your screen resolution is set so that the inch markings on the ruler displayed on the gauge above are actually spaced one inch apart. You can also manually measure the width of your hand with a ruler.
A new feature for your Synergy 2.0 heated apparel is the addition of a temperature sensor to each garment. This sensor allows your jacket to remain at a set temperature for the duration of a ride. It also serves as an emergency back up should your jacket get too hot. Combined with the I5A built in fuse in the wiring harness, you can ride in confidence knowing you are safe.
To ensure the best possible performance, it is important that Synergy 2.0 apparel be form- fitting and fit snugly without hindering wearer movement or comfort. Heat is transferred to the wearer through close contact between the garment and the wearer\xCDs body. It is recommended that no more than one thin layer of clothing be worn under Synergy electrically heated apparel. Thick layers such as sweatshirts and sweatpants, increase the space between the garment and the wearer, decreasing the effectiveness of the heating elements.
Includes: Gloves, Power Lead Battery Harness, and Singe Rheostat Unit (Temperature Controller)
Each Synergy 2.0 garment is heated by a series of durable steel fiber heating elements, which generate safe, electronically controlled infrared heat. In addition to safe and even heating, the steel fiber elements are lightweight, flexible and safe to operate in wet conditions. It is flexibility that allows Synergy 2.0 garments to fit comfortably under protective riding apparel.
- Tour Master\xCDs 3-Year Limited Warranty
- Designed to operate in all weather conditions from a vehicle's 12-volt electrical system
- Warmth without bulk or discomfort, making for a safer, more enjoyable ride
- Lightweight, flexible steel fiber heating elements provide safe, even warmth
- Expanding side panels help fine tune the fit and increase comfort
- Water-resistant
IMPORTANT: Before using this guide, please make sure that your screen resolution is set so that the inch markings on the ruler displayed on the gauge above are actually spaced one inch apart. You can also manually measure the width of your hand with a ruler.A new feature for your Synergy 2.0 heated apparel is the addition of a temperature sensor to each garment. This sensor allows your jacket to remain at a set temperature for the duration of a ride. It also serves as an emergency back up should your jacket get too hot. Combined with the I5A built in fuse in the wiring harness, you can ride in confidence knowing you are safe.
To ensure the best possible performance, it is important that Synergy 2.0 apparel be form- fitting and fit snugly without hindering wearer movement or comfort. Heat is transferred to the wearer through close contact between the garment and the wearer\xCDs body. It is recommended that no more than one thin layer of clothing be worn under Synergy electrically heated apparel. Thick layers such as sweatshirts and sweatpants, increase the space between the garment and the wearer, decreasing the effectiveness of the heating elements.
Tour Master\xCDs 3-Year Limited Warranty:
Tour Master warrants that the temperature control, heating elements and electrical connectors of all Synergy heated apparel to be free from material defects in design and manufacture under normal use for three years from your date of purchase, subject to the conditions below:
This warranty is provided to the original end user purchasing from an authorized Tour Master dealer and is not transferable. Proof of purchase is required.
Tour Master is not responsible for any failure caused by any third party product or component, whether authorized or not.
This warranty is void if the product is not used in accordance with the product instruction manual or if it is damaged as a result of improper installation, misuse, unauthorized repair, modifications or an accident.
Tour Master will, at its option, repair or replace products which meet the necessary warranty criteria.
Tour Master warrants that the temperature control, heating elements and electrical connectors of all Synergy heated apparel to be free from material defects in design and manufacture under normal use for three years from your date of purchase, subject to the conditions below:
This warranty is provided to the original end user purchasing from an authorized Tour Master dealer and is not transferable. Proof of purchase is required.
Tour Master is not responsible for any failure caused by any third party product or component, whether authorized or not.
This warranty is void if the product is not used in accordance with the product instruction manual or if it is damaged as a result of improper installation, misuse, unauthorized repair, modifications or an accident.
Tour Master will, at its option, repair or replace products which meet the necessary warranty criteria.
Tour Master Synergy 2.0 apparel is designed to operate from a vehicle\xCDs standard 12-volt
electrical system to provide unmatched levels of warmth and comfort. With Synergy 2.0 apparel,
wearers can be warm without the bulk and discomfort typically caused by excessive layers of
clothing. By providing increased warmth and mobility in cold temperatures, Synergy 2.0 apparel
helps reduce fatigue while increasing safety and enjoyment.
Each Synergy 2.0 garment is heated by a series of durable steel fiber heating elements, which generate safe, electronically controlled infrared heat. In addition to safe and even heating, the steel fiber elements are lightweight, flexible and safe to operate in wet conditions. It is flexibility that allows Synergy 2.0 garments to fit comfortably under protective riding apparel.
A new feature for your Synergy 2.0 heated apparel is the addition of a temperature sensor to each garment. This sensor allows your jacket to remain at a set temperature for the duration of a ride. It also serves as an emergency back up should your jacket get too hot. Combined with the I5A built in fuse in the wiring harness, you can ride in confidence knowing you are safe.
To ensure the best possible performance, it is important that Synergy 2.0 apparel be form- fitting and fit snugly without hindering wearer movement or comfort. Heat is transferred to the wearer through close contact between the garment and the wearer\xCDs body. It is recommended that no more than one thin layer of clothing be worn under Synergy electrically heated apparel. Thick layers such as sweatshirts and sweatpants, increase the space between the garment and the wearer, decreasing the effectiveness of the heating elements.
Tour Master Synergy 2.0 electrically heated apparel is powered by a 12-volt electrical system. No matter how wearers choose to use Synergy\xAC garments, only one Synergy 2.0 power lead wiring harness per person is needed.
Each Synergy 2.0 garment is heated by a series of durable steel fiber heating elements, which generate safe, electronically controlled infrared heat. In addition to safe and even heating, the steel fiber elements are lightweight, flexible and safe to operate in wet conditions. It is flexibility that allows Synergy 2.0 garments to fit comfortably under protective riding apparel.
A new feature for your Synergy 2.0 heated apparel is the addition of a temperature sensor to each garment. This sensor allows your jacket to remain at a set temperature for the duration of a ride. It also serves as an emergency back up should your jacket get too hot. Combined with the I5A built in fuse in the wiring harness, you can ride in confidence knowing you are safe.
To ensure the best possible performance, it is important that Synergy 2.0 apparel be form- fitting and fit snugly without hindering wearer movement or comfort. Heat is transferred to the wearer through close contact between the garment and the wearer\xCDs body. It is recommended that no more than one thin layer of clothing be worn under Synergy electrically heated apparel. Thick layers such as sweatshirts and sweatpants, increase the space between the garment and the wearer, decreasing the effectiveness of the heating elements.
Tour Master Synergy 2.0 electrically heated apparel is powered by a 12-volt electrical system. No matter how wearers choose to use Synergy\xAC garments, only one Synergy 2.0 power lead wiring harness per person is needed.